# Can Each RX480E-4 Output Pin Use a Different Mode?

**URL:** <https://rx480e.discourse.group/t/can-each-rx480e-4-output-pin-use-a-different-mode/22>\
**Category:** Trouble\
**Created:** [October 21, 2026, 9:37am UTC](https://rx480e.discourse.group/t/can-each-rx480e-4-output-pin-use-a-different-mode/22 "2026-10-21T09:37:31Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Zercher](https://yyz2.discourse-cdn.com/flex012/user_avatar/rx480e.discourse.group/zercher/32/21_2.png) [@Zercher](https://rx480e.discourse.group/u/Zercher)\
**Post date:** [October 21, 2026, 9:37am UTC](https://rx480e.discourse.group/t/can-each-rx480e-4-output-pin-use-a-different-mode/22/1 "2026-10-21T09:37:31Z")

</div>

We collected this question from a customer: Can D2 be Toggle while D3 stays Momentary?

 ![image](https://canada1.discourse-cdn.com/flex012/uploads/rx480e/original/1X/2e294f5f5c85e16edebb49fdc0d1b2e73fe06721.jpeg)

No. RX480E-4 does not provide a separate mode setting for each output pin. You select one working mode for the receiver, and some modes mix output behaviors.

The manual includes Two Toggle + Two Momentary channels. That is one complete mode, not a setting you can change pin by pin.

If that behavior fits your project, use it. If you need a different mode for every pin, RX480E-4 cannot do that.

Do you need one output to stay on only while its button is held, while another toggles on and off?

See the complete mode list in the [RX480E-4 manual](https://qiachip.github.io/qiachip/RX480E/RX480E-4/QIACHIP_RX480E-4/).